Here are the tips to maintaining an ugr19 LED panel

by Drew
0 comment

As much as Ugr19 LED panels are very popular today especially for businesses who want to keep cost at a bare minimum. The idea of having maintenance-free lighting is quite tempting since it means more money gets to stay in the bank. However, all lighting including LED panel lighting requires to be maintained to last longer and remain efficient. Here are a few pointers to guide you in ugr19 LED panel maintenance.

Correct Energy Supply

Just like any other LED panel, ugr19 LED panels occasionally experience frequent power surges. This normally happens when the temperature externally is higher than the radiated heat. To avoid the surges, you ought to ensure that there is enough power supply in the installation cables with stable grounding protection. Also, you ought to ensure that the environmental condition of the room or outside is not affecting the operational performance of the LED panel. Read user manual well before use so that you are conversant with how to use or handle the panels.

Perform Regular Cleaning

Like other forms of lighting, the ugr19 LED panel always requires to be kept clean. Accumulation of dust and debris inside and outside of the panel can cause shortages and interfere with its luminance. The first thing to do before cleaning your LED panel is unplugging the device from a power source. Apply the required cleaner on an appropriate wiping cloth and gently wipe the surface to avoid scratching the surface. If you must use a screen cleaner or a spray, be careful not to spray it onto the screen or the wires to avoid short-circuiting the panel. Regular cleaning will extend the lifetime of use.

Conducive Environmental Conditions

Ugr19 LED is made to withstand very low temperatures and high heat waves. As much as you may find this widely conducive and adaptable the downside is that it must be mounted in a position where it will operate effectively. For instance, placing it in a poorly ventilated area will lead to overheating of internal components thus causing damage.

Software and Hardware Maintenance

LED panels to come with both software and hardware components that allow for proper user functionality. The software components allow for user control capabilities such as brightness and temperature controls. If your LED panel has the software capabilities, then you will need to regularly ensure you update the required software to ensure it performs optimally. Computerized updates will help you in monitoring the LED effectively whilst the detection of any malfunctions. The same applies to the hardware components that need to be inspected regularly. Ensure that the cables and other physical components are in good condition. Broken or worn out parts need to be replaced immediately. Loose or open cables need to be covered. If there’s any wetness wipe with a dry cloth to prevent surges and other anomalies.

Professional Maintenance

When it comes to dealing with wirings and cables, it’s better to leave that to the technicians. Ugr19 LED panelsĀ are usually sophisticated hence the need to have to professional technician fix it when it develops any malfunction. Avoid opening your LED panels to fix them as you run the risk of being electrocuted or damaging the panel altogether. If it has a warranty, then call the company and they will send some over to fix it for you better still move it to your desired location.

You may also like

Leave a Comment